Initialize Network Setting

How to initialize network setting for IFBD-HI01X/02X

1. Please turn on the printer power and wait booting up,
   then keep to press the push switch which is on IFBD-HI01X/02X for 5 to 9 seconds.
   And the LED color becomes red, then please release the push switch.




2. After "1.", again press the push switch once and release.
   The LED display will be "Extinguished" and initializing of the NIC settings in the non-volatile memory will begun.
   
   This initializing by the push switch is aimed for a recovery of network connection,
   so the items of initializing are IP parameter and password only.
   Other setting can be initialized by "Set Default" of the Web UI.



3. If the initialization is successful, the printer will automatically be reset.
   Do not turn off the power or apply a reset until this reset has been applied.
   
   Also, if the NIC setting initialization fails, the LED display will be "Red Lit"
   and all operation will stop. If so, please turn the power off and retry.